Table of Contents
Advertisement
3.1
General information
The functionality of the operating panel is implemented using a PLC application that runs on
the operating panel. The PLC application must be programmed with the CODESYS program-
ming system for this.
A data server on the operating panel is responsible for the data exchange between system and
operating panel.
The following instructions describe the basic procedure for programming with CODESYS. An
analog value on the operating panel is represented by means of an example.
The "CODESYS repository package - operating panels" is required as well as CODESYS Ver-
sion V3.5 SP3 Patch 9. The repository package has been part of the scope of delivery of CPU
705001 since system version 02, and is supplied on the MiniDVD along with the setup program
(incl. the CODESYS version).
The repository package can also be downloaded for free on the JUMO website (search for
705001, click on the "Products" link and open the "Software" drop-down menu):
NOTE!
As of system version 05, repository package 705065_3_5_10_0_Eaton.package has to be
used.
NOTE!
As of system version 05, additional operating panels are supported (EATON, EXOR, ASEM)
which are not yet decscribed in this document (see current price sheet 705065).
3 Configuration
17
Advertisement
Table of Contents
