Table of Contents
Advertisement
1.2.3
Intended use
The measuring, control, and automation system is intended for use in an industrial environ-
ment, as specified in the technical data of the individual system modules. Other uses beyond
those defined are not viewed as intended uses.
The modules are manufactured in compliance with the relevant standards and directives as
well as the applicable safety regulations. Nevertheless, improper use may lead to personal in-
jury or material damage.
To avoid dangers, the modules may only be used:
•
For the intended use
•
When in good order and condition
•
When taking the technical documentation provided into account
Even if a module is used correctly and according to the intended use, it may still pose applica-
tion-related dangers, for example as the result of missing safety devices or incorrect settings.
To avoid incorrect settings, this manual contains relevant safety information and warnings.
These must be complied with.
1.2.4
Qualification of personnel
This document contains the information required to ensure that the measuring, control, and au-
tomation system described is used as intended.
It is intended for technically qualified personnel who have received special training and have
the appropriate knowledge in the field of automation technology (measuring and control tech-
nology).
Understanding and technically correct observance of the safety information and warnings in the
technical documentation supplied are prerequisites for safe startup as well as safety during op-
eration. Only qualified personnel have the required specialist knowledge to correctly interpret
and implement the safety information and warnings contained in this document in specific sit-
uations.
1.3
Acceptance of goods, storage, and transport
1.3.1
Checking the delivery
•
Ensure that the packaging and contents are not damaged
•
Check that the delivery is complete using the delivery papers and the order details
•
Inform the supplier immediately if there is any damage
•
Store damaged parts until clarification is received from the supplier
1.3.2
Notes on storage and transport
•
Store the module in a dry and clean environment. Observe the admissible ambient condi-
tions (see "Technical data")
•
The transport of the module is to be shockproof
•
The original packaging provides optimum protection for storage and transport
1 Introduction
9
Advertisement
Table of Contents
