Add Data Server And Data Source - JUMO mTRON T 570 Operating Manual

3 Configuration
Step
4
3.2.7

Add data server and data source

NOTE!
This example applies to system versions 02 to 04. As of system version 05, the term "Data
Server" has been changed to "Data Source Manager".
Step
1
2
26
Activity
Follow the instructions in the setup assistant. The following settings are made in
sequence there:
• Select installation type: "FTP installation"
• FTP parameter: IP address of the operating panel, enter username and
password
• Device type: select "XV-1xx"
• Select components
➥ After closing the firmware installation and rebooting the operating panel, the
"PLC3" symbol appears on the operating panel's screen.
Activity
Add data server:
Application (context menu) > Add object > Data server
Add data source:
DataServer (context menu) > Add object > Data source...