Download  Print this page

Whirlpool BSNF 8999 PB Daily Reference Manual page 5

Hide thumbs

Advertisement

ACTIVE 0 COMPARTMENT
The Active 0 compartment is specifically designed to maintain
a low temperature and a suitable humidity level, in order to
keep foods fresher for longer (e.g. meat, fish, cold cuts ).
Activating and deactivating the compartment
To activate/deactivate the Active 0 compartment, press the
dedicated button on the control panel.
FAN + ANTIBACTERIAL AIR FILTER
The Fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food.
If the appliance has the Fan it can be equipped with the
antibacterial filter.
Remove it from the box placed in the crisper drawer and
insert into the fan cover.
The replacement procedure is included in the
filter box.
The air filter symbol is lit on to indicates that it
is expired and need to be replaced. The filter
expires in 6 months. The User Interface gives
a visual feedback, without acoustic alarm. On
text display show message "Replace air filter". After replaced
the filter, press Stop Alarm button to reset message on the
text display/antibacterial air filter indicator.
REMOTE CONTROL
If Your refrigerator is connected to Internet, it allows
You to operate and monitor the appliance remotely
using a smart device.
To enable Remote Control:
Make sure router is ON
Press connectivity button for 3 seconds until a single
tone is emitted
. At this point the connectivity
symbol is blinking WPS icon switch ON to indicate that
theprocedure has started.
QUICK IDENTIFICATION OF CONNECTION STATE
ON APPLIANCE'S
Connection button state Connection descriptions
blinks fast
blinks slowly
ON solid
Appliance searching
connection to router
Appliance is connected
with router but it is not
able to connect server (for
example ADSL not working)
Appliance is connected to
server and server recognize
the appliance
Press WPS button on Your router
WPS indicator switch ON on user panel inform about the
connection status. WPS timeout has a duration of 2'30".
After successfully completed process WPS icon switch
OFF,connectivity button solid ON.
The refrigerator is now in Remote Control mode and is
ready to be operatedvia App.
The installation procedure need to be performed one
time.
If the router hasn't WPS button there is an alternative way
to connect the appliance with home wireless net see User
& Care.
Use the Whirpool App to control the appliance by remote , so
You can :
check your fridge and activate options also when you are
out of home
manage of food inventory and shopping list, receiving
notification about food
expiring - access additional functions as for instance the
smart party mode
optimize energy consumptions leveraging the best
energy tariff
access further information on best use of your fridge and
suggestions for best preservation
receive feedback about fridge status in case of alarms
While using Smart control of appliance all keys on user
interface are enable.
For more information about provisioning process follow the
app instructions or see the User Care Guide.
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses
LEDs light, allowing a better lightning as well as a very low
energy consumption.
If the LED light system does not work, please contact the
Service to replace it.
Important: The refrigerator compartment light switches
on when the refrigerator door is opened. If the door is kept
open for more then 10 minutes the light will be automatically
switched off.
FAN + ANTIBACTERIAL FILTER
The Fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food.
If the appliance has the Fan it can be equipped with the
antibacterial filter.
Remove it from the box placed in the crisper drawer and
insert into the fan cover.
The replacement procedure is included in the filter box.
EN
5

Advertisement

loading