Table of Contents
Advertisement
Service life of the product will extend and the
possibility of problems will decrease if the product is
cleaned at regular intervals.
m~~;;~:r~i~; ~~~~~~:~~~ :~i~~e~~j~~y
works.
There is the risk of electric shock!
m.D~~~~:~roduct
to cool down before you
clean it.
Hot surfaces may cause burns!
•
Clean the product thoroughly after each use. In
this way it will be possible to remove cooking
residues more easily, thus avoiding these from
burning the next time the appliance is used.
•
No special cleaning agents are required for
cleaning the product. Use warm water with
washing liquid, a soft cloth or sponge to clean
the product and wipe it with a dry cloth.
•
Always ensure any excess liquid is thoroughly
wiped off after cleaning and any spillage is
immediately wiped dry.
•
Do not use cleaning agents that contain acid or
chloride to clean the stainless or inox surfaces
and the handle. Use a soft cloth with a liquid
detergent (not abrasive) to wipe those parts clean,
paying attention to sweep in one direction.
•
Annual servicing by an authorised person is
recommended. If the appliance produces
unusual odour, yellow tipping flame, flame lifting
off the burner or is not performing as per tt1e
original installation, or for service contact: Beko
A and NZ Pty Ltd 1300 282 356
rn
he surface might get damaged by some
etergents or cleaning materials.
Do not use aggressive detergents, cleaning
powders/creams or any sharp objects during
20/EN
cleaning.
Do not use harsh abrasive cleaners or sharp
metal scrapers to clean the oven door glass
since they can scratch the surface, which may
result in shattering of the glass.
Do not use steam cleaners to clean the
appliance as this may cause an electric shock.
Cleaning the hob
Gas hobs
1 .
Remove and clean the saucepan carriers and
burner caps.
2. Clean the hob.
3. Install the burner caps and make sure that they
are seated correctly.
4. When installing the upper grills, pay attention to
place the saucepan carriers so that the burners
are centered.
Cleaning the control panel
Clean the control panel and knobs with a damp cloth
and wi
them
2
2
Knob
Sealing element
Do not remove the sealing elements under the
knobs for cleaning.
Advertisement
Table of Contents
