Mitel MIVOICE OFFICE 250 Quick Reference Manual page 2

S P E E D D I A L F E A T U R E S
P R O G R A M S P E E D D I A L T O A B U T T O N
1. Press 397.
2. Press the button you want to program.
3. Dial 382.
4. Enter the speed bin location 0 - 9 or scroll using
O T H E R F E A T U R E S
C H A N G I N G V O L U M E L E V E L S
Volume levels can be changed for:
• Ringer (alerting tone)
• Handset
• Headset
• Background music
• External speaker
You must be using the feature to adjust the volume level.
EXCEPTION: The volume of the ringer (alerting tone) can be set at any time.
Changing the volume level
While using the feature, press (Up) to increase the volume or press
volume.
Save the volume level
Press (Up) and (Down) simultaneously.
NOTE: Handset volume 11 cannot be saved.
P R O G R A M A H O O K F L A S H B U T T O N
1. Press 397.
2. Press the button you want to program.
3. Dial 330.
P R O G R A M A P H O N E E X T E N S I O N T O A B U T T O N
1. Press 397.
2. Press the button you want to program.
3. Dial the extension number.
E X T E R N A L T R A N S F E R U S I N G F L A S H
1. While on the phone with the caller, press the flash key and wait a few seconds until you hear dial tone.
2. Dial the number you want to transfer to and hang up once you hear ringing.
For more information regarding Mitel MiVoice Office 250, visit sasktel.com/mivoice.
keys.
(Down) to decrease the
P R O G R A M M I N G S P E E D D I A L S ( M A X I M U M 1 0 )
1. Press 383.
2. Dial the speed bin location 0 - 9#.
3. Enter name #.
4. Dial 9 followed by the telephone number. Example: 93068732000#.
To use speed dials, choose Outgoing 382 and dial the speed bin #.
U S E T H E D I A L P A D B U T T O N S T O E N T E R C H A R A C T E R S
You can use the dialpad buttons to enter text or numbers for features such as Do-Not-Disturb and Station
Speed Dial.
The following are guidelines when entering dialpad characters.
• Press to switch from Alpha Mode to Numeric Mode. The
in Alpha Mode and is off in Numeric Mode.
• Press to move the cursor to the left and delete characters.
• Press to move the cursor to the right.
• In Numeric Mode, press # for a hyphen (-).
• In Numeric Mode, Press * for a colon (:).
• Press #, , or lift and replace the handset to save entries.
Press the dialpad buttons as show in the following table:
button stays lit