Terminal Panel - NEC MultiSync V984Q User Manual

Large format display
Hide thumbs Also See for MultiSync V984Q:
Table of Contents

Advertisement

Terminal Panel

A
AC IN Connector
Connects with the supplied power cord.
B
Main Power Switch
On/Off switch to turn main power ON/OFF.
C
Audio IN
Audio signal input from external equipment such as a
computer or player.
D
DisplayPort OUT
Output DisplayPort signals from DisplayPort IN1.
You can connect multiple monitors by using DisplayPort
daisy-chain connection. See MULTI DISPLAY
Video out
(page
68).
E
DisplayPort IN1/IN2
DisplayPort signals input.
F
HDMI IN1/IN2/IN3
Digital HDMI signals input.
G
RS-232C IN (D-Sub 9 pin)
Connect RS-232C input from external equipment such as a
computer in order to control RS-232C functions.
H
Remote IN
Use the optional sensor unit by connecting it to your monitor.
NOTE: Do not use this connector unless specified.
I
microSD Card Slot
Insert a microSD memory card. To use the Media Player,
please connect a microSD memory card to this port
(See
page
23).
To install the microSD card slot cover, please refer to
"Installing microSD card slot cover" (See
J
USB1:
USB2:
USB CM1 (2A): Power supply port.
USB CM2: Service port. Please do not connect devices.
USB MP:
(page
39) and
K
LAN connection. See
NOTE: Please give priority for use to LAN1.
L
Audio signal output from the AUDIO IN, DisplayPort and
HDMI to an external device (stereo receiver, amplifier, etc.).
NOTE: This connector is not a Headphone terminal.
M
NOTE: Please turn off the monitor's main power when you
use the Internal/External speaker switch.
N
Audio signal output.
Red terminal is plus (+).
Black terminal is minus (-).
NOTE: This speaker terminal is for 15 W + 15 W (8 ohm)
speaker.
O
page
23).
English-11
USB Port
Downstream port (USB Type-A).
Connect USB devices.
Upstream port (USB Type-B).
Connect external equipment such as a computer.
To control the monitor from connected external
equipment, please use this port.
USB storage device port. This port is for future
software upgrades.
To use the Media Player, please connect USB
storage device to this port (See
MP is an abbreviation of Media Player.
LAN Port 1/2 (RJ-45)
page 48
and 51.
Audio OUT
Internal/External Speaker Switch
: Internal speaker
: External speaker.
External Speaker Terminal
Internal Speaker
USB Upstream
page
19).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multisync v754qMultisync v864q

Table of Contents