Table of Contents
Advertisement
Menu
Record/Stop
button
3. Use the Recording controls at the bottom of the window, as necessary.
Configure StreamCatcher for an HDMI source
Although the capture device features an HDMI In port, the StreamCatcher software
can support multiple sources. If the source you've connected is not displaying in the
preview window, it's likely that StreamCatcher is configured for a different source. To
configure StreamCatcher for your HDMI source:
1. Click the Settings button on the menu.
2. Click the Device Settings button.
3. Select the drop-down menu below Video Source and choose HDMI from the list,
and click the OK button.
Note: This device will not capture HDCP protected content. If your HDMI source is
HDCP protected, such as a retail Blu-ray Disc™, the video preview window will not
be visible.
Instruction Manual
Snapshot
Volume
button
control
* screenshots are for reference only
5
Video
preview
window
Advertisement
Table of Contents
Need help?
Do you have a question about the UVCHDCAP and is the answer not in the manual?