Table of Contents
Advertisement
RDV-1050 DVD Player
Repeat Playback
Turning the Subtitles On/Off
To Repeat Title or Play List
You can turn on or off the subtitle recorded
During playback, press REPEAT
. Each time
on a VR format disc.
3
you press REPEAT, one of the following repeat
1 During playback, press SUBTITLE
mode is selected.
subtitle selection window appears on the
TV screen.
PG: Repeats the current title.
ALL: Repeats all titles on the disc.
2 Press
/
OFF: Deactivates the repeat mode.
ON or OFF.
3 Press ENTER
A window which indicates the current repeat
or off, according to the selection you made
mode will be displayed on the TV screen. The
at step 2. The subtitle selection window dis-
mode indication on the window is the same
appears.
as the one on the menu bar.
(Repeat mode example on the TV screen)
MP3/WMA Disc Playback
PG
Make sure that the TV/DVD switch
On the display window, the following indication
remote control is set to "DVD" when using the
appears:
, numeric and TV/VIDEO - CANCEL
buttons for controlling the RDV-1050.
1: When "PG" or "PL" repeat mode is
selected.
The RDV-1050 can play back MP3 files and
WMA files on a home recorded CD-R/RW disc
: When "ALL" repeat mode is selected.
or commercially available CD. We refer to a
To stop repeat playback press REPEAT
to
3
disc that contains MP3 and/or WMA files as
select "OFF." Alternatively, press ■ (STOP)
an "MP3/WMA disc" in this manual.
to stop playback. The repeat mode will
10
If a disc contains both of MP3/WMA files and
be deactivated.
JPEG files, you can only play back files of the
NOTE: You can change the repeat mode
type selected by the MP3&WMA/JPEG set-
using the menu bar. See the Menu Bar sec-
ting in the PICTURE preference display.
tion.
About MP3/WMA Discs
Changing the Sound
On an MP3/WMA disc, each song is recorded
as a file (track). Files are sometimes grouped
The audio selection setting allows you to change
into folders by artists, album, etc.
the audio track(s) to be played back from
among stereo, L (left channel) and R (right
• Each file is regarded as a track.
channel).
• A folder which has one or more files is re-
1 During playback, press the AUDIO - fs/Rate
garded as a group.
button
. The audio selection window ap-
24
• A folder which does not directly contain any
pears on the TV screen.
tracks is ignored.
ST
• Files which do not belong to any folder are
grouped into "group 1."
ST
• The RDV-1050 recognizes up to 150 tracks
per group, and up to 99 groups per disc.
2 Press
/
or the AUDIO - fs/Rate
32 14
If there are files other than MP3/WMA files,
button to select the audio output you want.
they also count in the 150-file total.
3 Press ENTER
.You will hear the selected
35
audio output. The audio selection window
disappears.
24
. The
5
or SUBTITLE to select
32 14
. The subtitle is turned on
35
Notes For Making Your Own
MP3/WMA Disc Using a
on the
1
CD-R/CD-RW Disc
• Select "ISO 9660" as the disc format.
• For MP3 files, we recommend you record
your material at a 44.1 kHz sampling rate,
using the 128 kbps data transfer rate.
• For WMA files, make sure that the copy-
right feature is set to off.
• For WMA files, we recommend you record
your material at a bit rate of 64 kbps or
higher.
Basic operations
Use the following buttons to control MP3/WMA
disc playback.
ENTER: Starts playback while stopped.
:
Starts playback while stopped or
paused.
■:
Stops playback.
II
:
Pauses playback.
or
Skips back or forward a track
:
during playback. Selects the previ-
ous or next track while stopped.
If you press
(PLAY)
during playback,
28
or press ■ (STOP)
to stop playback fol-
10
lowed by
, the RDV-1050 starts playback
from the beginning of the current track.
17
Playing a Bonus Group on a
Changing Playback Order
DVD AUDIO disc
Playing Tracks in a Specific
Order (Program Play)
Some DVD AUDIO discs contain a special
group called "bonus group" whose contents
By programming tracks, you can play up to
are not opened to the public. The bonus group
99 tracks in any order. You may program the
is assigned to the last group of a disc. To play
same track more than once.
back a bonus group, you have to enter a
1 In stop mode, press ON SCREEN
specific "key number" for the bonus group.
The menu bar appears on the TV screen.
A way of getting the key number depends on
2 Press
/
discs.
Screen example for Audio CD
1 In stop mode, press the numeric buttons to
select the bonus group number (the last
group). The display window and on-screen
display prompt you to enter the key num-
3 Press ENTER
ber. The following box shows on the TV
pears. The PRGM
screen.
in the display window.
_ _ _ _
KEY
4 For DVD Audio Press the numeric but-
tons to specify selections in the desired order
by group and track numbers.
2 Press the numeric buttons to enter the key
number. If you enter the correct key num-
For each program step, specify a group first,
ber and press ENTER
, the RDV-1050
35
then a track. To specify track 14 in group
starts playback of the bonus group. If you
2: press 2, +10 then 4.
entered a wrong key number, you are
For SVCD/Video CD/Audio CD Press
prompted to enter the correct key number.
the numeric buttons to specify the tracks in
the desired order.
To turn off the key number entry
display
To select 5: press 5.
To select 23: press +10, +10, then 3.
Press ■ (STOP)
, open the disc tray,
10
To select 40: press +10, +10, +10, then 10.
or turn the power off.
• Once you enter the correct key number, the
Example of DVD Audio Programming Table
unit memorizes it until you turn off the power
or open the disc tray.
• If you specify a track in the bonus group
for the program playback, you will also be
prompted to enter the key number during
program play.
• In the random playback, tracks in the bo-
nus group are not played back.
To correct the program press
to move
to the track to be corrected, then
press TV/VIDEO - CANCEL
erased and the subsequent programmed tracks
move up. Pressing ■ (STOP)
programmed tracks.
5 Press
(PLAY)
to start program play-
29
back. With an Audio CD disc, the program
table remains on the TV screen during pro-
gram playback. (Pressing ON SCREEN
brings up the status bar.)
When all of the programmed tracks have
finished playback, the RDV-1050 stops and
the program table appears again. Note that
the program remains.
twice.
34
NOTE: During program playback, you
to move
to
PROG.
.
13 33
cannot edit the program contents.
To Check the Program Contents
During playback, press ■ (STOP)
Playback stops and the program table is shown.
. The program table ap-
When the RDV-1050 is playing back an Au-
35
indicator lights up
dio CD and the program table is not shown,
you can bring up the table by carrying out
steps 1 to 3.
During DVD Audio/SVCD/Video CD play-
back, you can check the program contents via
the menu bar.
To stop program playback
Press ■ (STOP)
.
10
To clear the program
While stopped and the program table is shown,
press ■ (STOP)
.
10
To exit the program mode
After clearing the program, press ON SCREEN
.
34
NOTES: When the disc tray is opened or the
RDV-1050 is turned off, the program is
cleared.
If you are going to program a track in the
bonus group of an AUDIO DVD, you will be
prompted to enter the key number for the bo-
nus group.
/
32 14
. The track is
23
clears all the
10
English
.
10
Advertisement
Table of Contents
