Table of Contents
Advertisement
RDV-1050 DVD Player
Locating a Scene From the
Locating a Position in the
Menu of a SVCD/Video CD
Current Title or Track
with PBC
(Time Search)
Some SVCD/Video CD discs support the PBC
You can play a disc from a certain position
function. PBC is an abbreviation of "Playback
by specifying the time from the beginning of
Control." Some SVCD/Video CD discs re-
the current group (for DVD AUDIO), the cur-
corded with PBC have their own menus, such
rent title (for DVD VIDEO) or the disc (for
as a list of the songs on the disc. You can lo-
SVCD/Video CD/Audio CD).
cate a specific scene by using the PBC menu.
For DVD AUDIO/DVD VIDEO/Audio CD: Dur-
1 In stop mode, press
(PLAY)
or TOP
29
ing playback or while in stop mode –
MENU
. A disc menu appears on the TV
12
For SVCD/Video CD: In any condition except
screen.
SVCD/Video CD playback with PBC –
2 Press the numeric buttons
to select the
4
1 Press ON SCREEN
desired item.
appears on the TV screen.
Examples:
2 Press
/
To select 5: press 5.
then press ENTER
To select 23: press +10, +10, then 3.
for entering time appears.
To select 40: press +10, +10, +10, then 10.
Screen example for DVD VIDEO
The RDV-1050 starts playback of the selected
item. To return to the menu, press RETURN
.
19
8.5Mbps
OFF
TIME
NOTE: If something like NEXT or
PREVIOUS appears on the TV screen,
Screen example for Audio CD
pressing
advances to the next
27
page, and pressing
returns to the
9
previous page.
OFF
TIME
Specifying a Title/Group
3 Press the numeric buttons (0 to 9) to enter
the desired time. The specified time is dis-
played in the pull-down menu.
1 During playback, press TITLE/GROUP
.
8
Example (for DVD AUDIO or VIDEO)
[––] is shown in the title display area of the
display window.
2 Press the numeric buttons
4
to specify a
title to be played.
To playback from 2(H):34(M):00(S), press 2,
3, then 4.
Examples:
To select 5: press 5.
Example (for SVCD/Video CD/
To select 23: press +10, +10, then 3.
Audio CD
To select 40: press +10, +10, +10, then 10.
The RDV-1050 starts playback from the speci-
fied title.
To playback from 23(M):40(S), press 2, 3, then
4.
NOTE: This function may not work with
some DVD AUDIO/DVD VIDEO discs.
You do not have to press "0" to enter the trailing
zeros (for the last two digits in the example
above).
To correct a mistake press
move back to the digit where you entered a
wrong number, and reenter the correct one.
16
4 Press ENTER. The RDV-1050 starts playback
from the specified time.
To dismiss the menu bar press the ON SCREEN
button again.
NOTES:
"10" and "+10" buttons are not used with
this function.
Some DVD VIDEO discs do not contain
time information, and the time search func-
tion cannot be used.
When a DVD AUDIO disc is stopped, you
can specify the elapsed time from the be-
ginning of group 1.
The time search function cannot be used
during program playback.
twice. The menu bar
34
Selecting a DVD AUDIO Disc
to move
to
,
Still Picture
13 33
. The pull-down menu
35
Most DVD AUDIO discs include still pictures,
which appear in turn during playback. When
TITLE 33
CHAP 33
TOTAL 1:25:58
there are other "page(s)" of the current still
CHAP.
1/3
1/5
1/3
picture and you can change the picture ("turn
_:__:__
the page") manually.
At the beginning of a part where there are
selectable pictures, PAGE appears on the TV
TRACK 33
TIME
25:58
screen (except when the ON SCREEN GUIDE
PROG. RND.
__:__
preference is set to OFF).
1 During playback except when the status bar
is shown, press PAGE
7
lection window appears on the TV screen.
PAGE 1/32
1
2 Press PAGE or
/
14 32
desired page.
3 Press ENTER
The selected page (picture)
35
is shown and the page selection window
disappears.
repeatedly to
NOTES:
The RDV-1050 does not support "packet
writing (UDF format)" discs.
The RDV-1050 does not support the ID3
tag and WMA tag.
The RDV-1050 supports discs recorded
with multiple sessions.
Some discs may not play due to disc
characteristics or recording conditions.
Programmed and random playback func-
tions do not work with MP3/WMA discs.
For MP3, the RDV-1050 only can play
back tracks with the following file exten-
sions; ".MP3," ".Mp3," ".mp3" and
".mP3."
For WMA, the RDV-1050 only can play
back tracks with the following file exten-
sions; ".WMA," ".wma," and any other
combination of upper case and lower case
letters (such as ".Wma").
Time required for reading the disc con-
tents may vary for different discs, depend-
ing on the number of groups (folders) and
tracks (files) recorded, etc.
You cannot advance or reverse playback
by pressing
30
ing down
27
MP3/WMA disc playback.
The RDV-1050 supports WMA files re-
corded with a bit rate of 48 kbps or higher.
The RDV-1050 cannot play back WMA
files recorded with a bit rate under 48
kbps.
. The page se-
Selecting a Group and Track
When inserting an MP3/WMA disc, after the
disc contents are read, the MP3/WMA CON-
TROL display automatically appears on the TV
to select the
screen. You can select a group/track from the
display using the following procedure.
1 Make sure that the black (cursor) bar is in the
left (group) column. If it is in the right column,
press
to move it to the left column.
25
2 Press
/
to move the bar to a
32 14
desired group. On the right column, tracks
in the selected group are shown.
3 Press
or
to select a de-
27
9
sired track, then press ENTER
or
(PLAY)
.
9
29
or
Press the numeric buttons
4
specify a desired track number.
Examples:
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
The RDV-1050 starts playback from the se-
lected track.
You can also select a desired track by press-
ing
to move the black bar to the right
33
(track) column then using
/
32 14
NOTES: If an MP3/WMA file name in-
cludes any 2-byte character, the RDV-1050
cannot show the file name correctly.
Only MP3/WMA files are shown on the
MP3/WMA CONTROL display.
or
, or by hold-
11
The order of groups/tracks shown in the
or
during
9
MP3/WMA CONTROL display may differ
from the order shown on your personal
computer when you access the disc on your
computer.
Direct Selection
You can select a desired group directly by speci-
fying the group number.
1 During playback or while stopped, press
TITLE/GROUP
. [—] is shown in the
8
group display area of the display window.
2 Press the numeric buttons to specify a de-
sired group number.
Examples:
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
Specify the group number within several sec-
onds after pressing TITLE/GROUP (i.e. while
the display window shows [—]). The RDV-1050
starts playback from track 1 of the selected
group.
3 Press the numeric buttons to specify a track
number. The RDV-1050 starts playback from
the specified track.
English
Repeat Playback
During playback or while stopped, press RE-
PEAT
. Each time you press REPEAT, the
3
repeat mode changes as follows.
or
27
to directly
On Screen Display
.
If you press REPEAT while stopped, you need
to press ENTER
or
(PLAY)
to start
35
30
repeat play.
To stop repeat playback press ■ (STOP)
.
10
Note that the repeat mode remains active.
To Quit Repeat Playback
During playback, press REPEAT
3
until no
repeat icon is shown on the display window.
While stopped, press REPEAT until repeat mode
indication on the MP3/WMA CONTROL dis-
play goes off.
Checking the Sampling Frequency
and Quantization Bit Length
You can check the sampling frequency and
quantization bit length of digital audio dur-
ing playback using the AUDIO - fs/Rate but-
ton
.
24
Advertisement
Table of Contents
