Table of Contents
Advertisement
RDV-1050 DVD Player
Precautions for the Safe Use
4 Test the program setting by pressing the TV
of Batteries
POWER
18
set on. If there is more than one code listed
Observe the following precautions for the safe
for the manufacturer of your TV, try them
use of batteries. If they are used improperly
one by one until you succeed.
their life will be shortened, they may burst or
Manufacturer No.
their contents may leak.
Aiwa
36
Beijing
22
• Remove the batteries from the remote con-
CCE
02
trol if it will not be used for a long period
Changhong 34
Daewoo
17, 37
of time.
Ferguson
27
• Remove dead batteries and dispose of them
Finlux
30
Funai
32
properly.
Gradiente
15, 20
Grundig
19
• Never leave dead batteries lying around.
Hitachi
10
Do not take them apart, mix them with other
ITT
28
Jinxing
38
refuse, or throw them into an incinerator.
JVC
01, 23,
24, 25
• Never touch liquid that has leaked out of
Konka
40
a battery.
LG (Goldstar) 18
Magnavox
02
• Do not mix new and old batteries, or bat-
Mitsubishi
03
Mivar
29
teries of different types.
Remote Control TV Operation
Programming the RR-DV96
Remote to Control a TV
When the TV/DVD switch
sition the following buttons can be used to con-
After it is programmed the RR-DV96 can op-
trol the TV.
erate your TV set.
1 Set the TV/DVD switch
to TV.
1
TV POWER
18
Turns the TV on or off.
2 Press and hold down the TV/VIDEO-CAN-
CEL
button. Then enter the manufac-
23
CH+ and CH –
turer code of your TV listed in the follow-
Changes the TV channels.
ing table using the numeric buttons (0 - 9)
VOL+ and VOL –
. Do not release TV/VIDEO-CANCEL
4
Adjusts the TV volume.
button until the next step is completed. (Ex-
ample: To enter code "01" press and re-
TV/VIDEO button
lease the "0" button, then press and release
Switches the TV input between TV and Video.
the "1" button.
0 - 10 and (Numeric Buttons)
3 Press the ENTER
button, then release
35
Selects the TV channels. Note: For some TVs,
the TV/VIDEO-CANCEL button.
pressing "+10" functions as the "+100". The
"10" button functions as ENTER if your TV re-
quires pressing the ENTER after selecting a
channel number.
MUTING button
Mutes the TV sound.
External Remote In
The 3.5mm mini-jack (labeled EXT REM IN)
receives command signals from an industry
standard infrared receiver. This feature is useful
when the unit is installed in a cabinet and the
front panel sensor is blocked. Consult your au-
thorized Rotel dealer for information on ex-
ternal receivers and the proper wiring of a jack
to fit the mini-jack receptacle.
10
Playable Discs
button to see if it turns your
This unit can play the following types of discs:
DVD Video
DVD Audio
Manufacturer No.
NEC
20
Noblex
22
Nokia
31
Panasonic
04, 11
Peony
34, 38,
Video CD
39
Philco
10, 17,
21
Philips
02
RCA
05
Samsung
12, 33,
SVCD
Audio CD
34, 35
Sanyo
13, 16
Sears
13
Sharp
06
Sony
07
TCL
41
Thomson
26
The RDV-1050 can also play back the following
Toshiba
08, 14
Zenith
09
discs:
• 9.4GB/4.7GB DVD-RAM with no cartridge,
is in the TV po-
recorded with the video recording standard
1
version 1.1.
• 9.4GB/4.7GB DVD-RAM with cartridge but
can be removed from the cartridge, recorded
with the video recording standard.
• DVD-R/RW discs written in the DVD VIDEO
32 14
format and finalized.
• DVD-RW (version 1.1) discs written in the
33 13
VR (Video Recording) format and finalized.
• CD-R and CD-RW discs written in the SVCD,
Video CD or Audio CD format and final-
23
ized.
• CD-R and CD-RW discs written in MP3 or
4
WMA in accordance with the "ISO 9660"
format.
• CD-R and CD-RW discs written in JPEG in
accordance with the "ISO 9660" format.
The RDV-1050 can play back audio signals
22
recorded in MIX-MODE CD, CD-G, CD-EX-
TRA and CD TEXT.
NOTES: If a disc is dirty, scratched or
warped, or has unusual disc or recording
characteristics, it may take considerable
time for the RDV-1050 to read the disc
contents. In some instances the RDV-1050
may not be able to play certain discs.
With some DVD-RAM and DVD-RW discs
(recorded in VR format), portions such as a
part between two programs may not be
played back smoothly.
31
2 Press
/
to move
to DELAY
Setting the speaker level
32 14
and press ENTER
. The DELAY display
35
You can adjust the output level of each speaker.
page appears on the TV screen.
1 Press CHOICE
on-screen displays appears on the TV
screen. If necessary press
bring up the SPK.SETTING menu.
2 Press
/
and press ENTER
page appears on the TV screen.
3 Press
/
to select the speaker to be set
and press ENTER.
CENTER SPEAKER: center speaker
SURROUND SPEAKER: surround
speakers
4 Press
/
to select the appropriate dis-
tance and press ENTER.
3 Press
/
and press ENTER.
When you select CENTER SPEAKER, you can
select the appropriate distance from 0.0m to
FRONT SPEAKER: front speakers
1.5m (4.9 ft) in 30 cm (1 ft) increments.
(This item cannot be selected. The level
is fixed to 0 dB.)
When you select SURROUND SPEAKER, you
can select the appropriate distance from 0.0m
CENTER SPEAKER: center speaker
to 4.5m (4.75 ft) in 30 cm (1 ft) increments.
SURROUND SPEAKER: surround
5 Repeat steps 3 and 4 if you want to set other
speakers
speakers.
SUB WOOFER: subwoofer
To return to the SPK.SETTING page Press /
4 Press
/
to move
to RETURN and press ENTER.
The selectable level ranges from –6 to 6 dB
in 1 dB unit.
If the distance from the front speakers and the
5 Repeat steps 3 and 4 if you want to set other
other to the listener is the same select 0.0m.
speakers.
If there is a difference between them, refer to
the following diagram to set the delay time
To return to the SPK.SETTING page Press
correctly.
to move
to RETURN and press ENTER.
Subwoofer
NOTE: For the speaker(s) whose size is set
Center speaker
Center speaker
Center speaker
to NONE in the SPEAKER SIZE menu, the
Front
Front
speaker level cannot be set.
speaker (L)
speaker (R)
3.0m
To Generate Test Tone Signals
2.7m
2.4m
2.1m
You can check the level setting by monitoring
the test tone.
Surround
Surround
Surround
Surround
Surround
Surround
1 Press
/
speaker (L)
speaker (L)
speaker (L)
speaker (R)
speaker (R)
speaker (R)
and press ENTER
2 Press
/
The test tone will be generated when you
In the above example, set the CENTER
select the speaker(s) in the LEVEL page.
SPEAKER to 0.3m and the SURROUND
SPEAKER to 0.9m.
NOTE: The test tone sound is not output
from the subwoofer.
Limiting Playback
by Children
. One of the preference
15
/
to
13 33
This function restricts playback of DVD VIDEO
to move
to LEVEL
32 14
discs which contain violent (and other) scenes
. The LEVEL display
35
according to the level set by the user. For ex-
ample, if a movie which includes violent scenes
supports the parental lock feature, such scenes
which you do not want to let children view can
be cut or replaced with other scenes.
To Set Parental Lock for the
First Time
1 Press CHOICE
. One of the preference
15
on-screen displays appears on the TV
screen. If necessary press
bring up the OTHERS menu.
to select the speaker to be set
2 Press /
to move
32 14
RENTAL LOCK then press ENTER
Parental Lock on-screen display appears on
the TV screen.
to set the level and press ENTER.
3 While
is pointing to COUNTRY CODE,
press ENTER to bring up the pull-down
menu.
/
4 Press
/
to select the country code. Se-
lect the code of the country whose standards
were used to rate the DVD Video disc con-
tent. See "Appendix A: Country/Area code
list for Parental Lock".
to select TEST TONE
32 14
.
35
to select ON and press ENTER.
English
/
to
13 33
to select PA-
. The
35
— continued
Advertisement
Table of Contents
