Specifications - Q-See QTH7212P User Manual

INTRODUCTION
This manual is written for the QTH7212P pan-tilt camera and was accurate at
the time it was completed. However, because of our ongoing effort to constantly
improve our products, additional features and functions may have been added
since that time and on-screen displays may change. We encourage you to visit our
website at www.Q-See.com to check for the latest product announcements. You
can also find technical details and an electronic version of this manual on our online
Knowledge base online at www.Q-See.com/support.
Throughout the manual we have highlighted warnings and other important
information that will assist you in operating your new system in a safe and trouble-
free manner. Please take the time to read and follow all instructions and pay
attention to alerts as shown below:
IMPORTANT! Red boxes with this icon indicate warnings. To prevent
possible injury or damage to the product, read all warnings before use.
NOTE! Text in blue boxes with the Information icon offer additional guidance
and explanations about how to make the most out of your system.
For your safety and to protect your camera
To prevent damage to your Q-See product or injury to yourself or to others, read
and understand the following safety precautions in their entirety before installing or
using this equipment.
WARNING! ELECTRIC SHOCK RISK!
n Care should be taken during transportation, storage and installation of this camera
to avoid rough handling, dropping, or other abuse in order to prevent damage to the
optics or components inside the camera.
Camera should be installed in accordance with electrical standards including keeping
n
the camera and cable away from high voltage, using a transient voltage surge
protector (UL-1449) and using only the rated power supply.
Do not use strong or abrasive cleaners on camera body or lens. Use a damp cloth
n
for cleaning the housing and a lens cloth for the optics.
n Do not attempt to disassemble the camera beyond removing the case to adjust
settings. Only authorized, trained technicians should service this camera.
The camera should not be immersed in water and should be mounted in a sheltered
n
location. Do not point camera directly at the sun or other strong light source.
4
FEATURES
Your camera offers the following features:
Compatible with QTH-series BNC HD DVRs
n
High quality video using 1/4" Aptina Sensor with NextChip 2431 processor to
n
produce 720p high definition video.
Weatherproof IP65 Rating
n
RS485 control.
n
128 preset positions - 80 preset positions and 48 special function settings.
n
3.6mm fixed lens.
n
360° continuous horizontal rotation with 90° vertical movement.
n
Low-noise camera rotation motor.
n
n Fully-functional built-in decoder - all data is saved inside of the module to retain
settings in case of power loss.
Rotation/tilt speed: 25°/second
n
Decoder's all-in-one integrated design ensures high reliability.
n

SPECIFICATIONS

Image 1/4" Aptina
Sensor
Digital NextChip 2431
Signal
Processor
Signal NTSC
System
Lens 3.6mm
Effective 1280x720
Pixels (HxV)
Usable .01 lux
Illumination
Scanning 2:1 Interlace
Sync. Internal
System
Horizontal 720p / 1 Megapixel
System
Shutter NTSC=1/60 ~1/100,000 sec
Speed
S/N Ratio > 52dB
White Auto
Balance
BLC Auto
AGC Auto
Video 1.0V P-P,75Ω BNC
Output
Input 12V 1.2A
Current
Power <6W
Consump-
tion
Protection IP65
Rating
Operating 14°F to 122°F (-10°C to 50°)
Temp (relative humidity: up to 95%)
Storage -22°F to 158°F (-30°C to
Temp 70°C)
Color Black
Control Pelco-D and Pelco-P
Protocol
Baud Rate 2400b/4800b/9600b
5