STEP 1 Before installing, please register your device on the Q-See Support Portal at www.q- see.com/register to receive critical updates and support for your system. Registering will also help us to assist you with any technical or warranty issues if ever necessary.
Page 3
If the light displays solid red, hold the reset button for 15 seconds to reset the camera. STEP 3 STEP 4 Download the Q-See Plus app from Tap on Register and create an the App Store on your mobile device.
Page 4
STEP 5 Enter an email address to use for your account. You should immediately receive an email with a verification code. You will have two minutes to enter the verification code, so be sure you will have quick access to the email address used. Tap Send verification code to mail.
Page 5
STEP 8 Enter your email address again and the new password. Tap Login to continue. STEP 9 Tap the + symbol to continue. In the following screen, select “Wi-Fi Camera” for device type. Next, using your mobile device’s camera, scan the QR code on the back of the Wi-Fi camera.
Page 6
STEP 10 Once the QR code scans, a new screen will appear with login credentials. Do not edit any of the credentials. Do not enter a verification code. Tap to continue. STEP 11 In the next screen, tap “Yes, config Wi-Fi”. Enter your Wi-Fi network’s password and before tapping “Next”, place your mobile device within 12”...
Page 7
WI-FI CONNECTIVITY TROUBLESHOOTING If you are having issues connecting your QCW Wi-Fi camera to the desired Wi-Fi network, this tutorial will show you how to establish the connection with the help of a standard Ethernet (CAT5) cable. STEP 1 Select Ethernet Wi-Fi Setup.
Page 8
STEP 3 If your camera is already connected to a Wi-Fi network it will appear at the top. Select the Wi-Fi network you wish to connect your camera to. STEP 4 Enter the password for your Wi-Fi network. STEP 5 Select Start Preview once the camera is connected.
CAMERA FEATURES MICROPHONE The 4MP Wi-Fi Pan Tilt Camera features the CAMERA LENS ability to rotate your camera view left to right (pan) and to adjust your camera view up and down (tilt). SPEAKER The camera’s microphone and speaker will enable you to both hear and speak through your camera for two-way audio purposes.
DISCLAIMER: Although Q-See has made every effort to ensure that the information in this guide was correct at the time of printing, Q-See does not assume any liability to any party for any loss, damage, or disruption caused by any errors, omissions, or typos that may occur.
Need help?
Do you have a question about the QCW4MP1PT and is the answer not in the manual?
Questions and answers