Eic Dp2Xx Force And Inhibit Regeneration Software Function Description - Danfoss DP200 User Manual

User Manual EIC-Engine Information Center – DP2xx

EIC DP2xx Force and Inhibit Regeneration software function description

While the unit is displaying one of the Monitor Screens, pressing any soft key
will show the available Navigation actions in an action menu. There are two
separate action menus on this level; the first one to appear contains the
following actions (from left to right):
y Next Menu
y Screen Brightness/Contrast
y Initiate Switch (Force Regeneration)
y Inhibit Switch (Inhibit Regeneration)
Selecting 'Next Menu' will display the second action menu with actions
unrelated to the function described herein. Pressing it again will show the
first set of actions once more. If no soft keys are pressed and released for
2.5 seconds while the action menu is shown the menu will disappear and the
actions are no longer available. Pressing (and releasing) any soft key will
activate the first menu once more.
11032748_Rev DA_Sep2014
8