Mitsubishi Electric PKH-2GKLA Technical & Service Manual page 63

OPERATION PROCEDURE
12. REMOVING THE SIGNAL RECEIVING P.C. BOARD
(1) Remove the terminal block cover.
(2) Disconnect the connector <yellow> for the wireless remote
controller.
(3) Remove the front panel. (See Photo 1)
(4) Remove the 2 screws and signal receiving P.C. board cover.
(5) Remove the signal receiving P.C. board.
OC231A
PHOTOS & ILLUSTRATION
(Photo 13)
Set screws
Signal receiving P.C. board cover
(Photo 15)
Signal receiving P.C. board
63 63
Front
panel
Front
panel