Table of Contents
Advertisement
Installation
IPLCR4-MB
DO NOT CONNECT AMPLIFIER
DIRECTLY TO SPEAKER!
Connections
• Strip the insulation on each conductor approximately 1/2" (12.7mm) and
insert to the speaker terminals. Ensure that there are no stray strands
of wire protruding from the connectors that can cause shorts. Observe
proper polarity (+ to + and – to – for each speaker and at the amplifier)
and that surround channels are properly positioned and connected, if
used.
• WHEN CONNECTING THE AMPLIFIER TO THE IPLCR4-MB, CONNECT
THE AMP TO THE APPROPRIATE IN -/+ TERMINALS AS SHOWN. DO
NOT CONNECT THE AMP DIRECTLY TO THE DRIVERS.
- IN +
CONNECT AMPLIFIER
TO - IN +
9
DO NOT CONNECT AMPLIFIER
DIRECTLY TO SPEAKER!
Advertisement
Table of Contents
