Table of Contents
Advertisement
Installation
Installation
• With the 'dogs' flush to the side of the speaker, insert the speaker into
the cutout and tighten each of the eight screws to swing the dogs out,
and clamp the speaker to the drywall. Do not overtighten.
Turn screws to extend dogs
as shown
Attach Grille
• Attach the grille to the speaker. The grille attaches with magnets so it
will just snap into place.
Pivoting Tweeter
• With the speaker installed, the tweeter can be pivoted to point directly
into the main listening area for tighter imaging of high frequency
content. Pointing the tweeter away from the main listening area will
create a more ambient sound.
Carefully press the edge of the
tweeter as shown to pivot the
tweeter to the desired position.
10
Turn screws to extend dogs
as shown
Advertisement
Table of Contents
