Fujitsu ETERNUS DX Configuration Manual page 6

Server connection, fcoe for vmware esx driver settings for non-fujitsu converged network adapter cards

Hide thumbs Also See for ETERNUS DX:

Table of Contents

Chapter 1

Setup Procedure for Emulex Converged Network Adapter Cards

1.1

Workflow

Setting Up Converged Network Adapter Card Driver

Check the default setting values and number of ports for the Converged Network Adapter card, and set

up the driver parameter values.

"1.2.4 Setting Up the Converged Network Adapter Card Driver" (page 15)

•

After completing all the required procedures in this manual, proceed to "Checking the LUNs" in "FUJIT-

SU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for VMware

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for VMware

ESX".

ESX

P3AM-4772-11ENZ0

Table of Contents