Removing A 3½-Inch Fdd; Figure 3 - 6 Removing A 3½-Inch Fdd From The Top Bay; Figure 3 - 7 Removing A 3½-Inch Fdd From The Bottom Bay - Digital Equipment DECpc LPv 425sx Service Maintenance Manual

Service Procedures
Removing a 3½-Inch FDD
To remove a 3½-Inch FDD:
1) Turn off the computer.
2) Disconnect external devices, ac power and monitor power.
3) Unlock and remove outside cover.
4) Disconnect power and ribbon cables.
5) From the top bay, remove two retaining screws from each side.
6) Remove FDD from bay.
7) From the bottom bay, remove two retaining screws securing the mounting adapter to chassis.
8) Remove FDD from bay with filler panel.
Figure 3 - 6 Removing a 3½-Inch FDD from the Top Bay
Figure 3 - 7 Removing a
3½-Inch FDD from the
Bottom Bay
38
Digital DECpc LPv/LPv+
MCS Logistics Engineering - Nijmegen