Removing A 3½-Inch Device From Front Bay (Venturis Fx And Celebris Fx Low Profile) - Digital Equipment Venturis FX Service Maintenance Manual

Removing a 3½-Inch Device from Front Bay (Venturis FX and
Celebris FX Low Profile)
1. Turn off the computer, monitor, and then disconnect power from the
computer.
2 Remove the outside cover.
3. Disconnect all power and data cables.
4. Remove the screws holding the drive to the bay.
5. Remove the 3½-inch device, which includes the rail and the brackets.
6. Remove the rail from the device.
7. Remove the brackets from the device.
FRU Replacement
5-81