Advertisement
Quick Links
higher than 254 Vac presents the message 0.
Function available for model N322T-NTC-LVD.
Set Point - Temperature adjustment for control. SP value is limited to the values
SP
programmed in SPL and SPk in the programming level.
heating systems, program ont to zero. Value in seconds, 0 to 999 s.
Delay - Delay time to start control. Upon power-on, control OUTPUT 1 is kept
dly
off until the time programmed in dly is elapsed. Its usage is intended to
prevent multiple compressors to start simultaneously after the turn-on of a
system with several controllers. Value in seconds, 0 to 250 s.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Novus N322T
Summary of Contents for Novus N322T
- Page 1 254 Vac presents the message 0. heating systems, program ont to zero. Value in seconds, 0 to 999 s. Function available for model N322T-NTC-LVD. Delay - Delay time to start control. Upon power-on, control OUTPUT 1 is kept Set Point - Temperature adjustment for control.
- Page 2 Not used for thermocouple inputs. are shown below: from 1 to 999 are allowed. Function 2 available only for models N322T-NTC and N322TB-NTC. Serial number - First part of the controller electronic serial number. Measured temperature exceeded maximum allowed range for the sensor.
Need help?
Do you have a question about the N322T and is the answer not in the manual?
Questions and answers