Digital Data Service; Pc Data Connection - Telular PHONECELL SX5D Technical Manual

Gsm desktop phone, 900/1800 mhz gsm dual band 1900 mhz gsm, voice communication and computer fax/data
Hide thumbs Also See for PHONECELL SX5D:
Table of Contents

Advertisement

DIGITAL DATA SERVICE

To PC Serial Port
DB-9 (female) to DB-9 (male) Cable
OR
DB-25 cable and PC
serial port have 25
PIN connections
DB-25 (female) to DB-9 (male) Cable
Figure - PC Data Connection
Standard Modem Setting
The SX5D features a DB-9 digital computer fax/data port for connection to a personal computer
(PC) - not supplied. When connected to a PC, the SX5D's PC interface is capable of sending
and receiving digital fax transmissions, sending and receiving e-mail communications, and
browsing the Internet. (Data speeds may vary depending upon your cellular network.)

PC Data Connection

A data cable - not included - is required for data transmission. To determine the necessary cable,
count the number of PIN connections in the serial port of your PC (see below). If there are 9 PIN
connections in the PC serial port, a DB-9 (female) to DB-9 (male) cable is required. If there are
25 PIN connections in the PC serial port, a DB-25 (female) to DB-9 (male) cable is required - see
Figure - .
For specific digital fax/data setup procedures, see Appendix A - How to Setup Your PC Serial
®
SX5
Port for Phonecell
Digital Fax/Data.
Sending and Receiving Digital Fax
Your computer needs a standard 19,200 bps modem and a commercial PC fax emulator
(Winfax, Netfax, etc.), To send a fax, no special settings are required. The computer will change
the SX5D mode setting automatically and reset it to voice mode after sending a fax. To receive
a fax, you must change the SX5D from voice to fax mode.
1) Set up a standard 19,200 bps modem.
2) Install a commercial PC fax emulator (Winfax, Netfax, etc.).
Phonecell
SX5D
®
DB-9 cable and PC serial
port have 9 PIN connections
To DB-9 Data Port
27
Technical Manual

Advertisement

Table of Contents
loading

Table of Contents