To End A Call; To Mute A Call - Telular PHONECELL SX5D Technical Manual

To Place a Call
1) Pick up the handset or press the Speaker phone button. The
SX5D is now "off-hook."
2) Listen for dial tone.
3) Dial the phone number. The dialed number is displayed on the
display, along with the name if it is stored in your phonebook.
To Correct Dialing Errors
• To erase one digit, press the CLEAR key once.
• To erase all digits, press and hold down the CLEAR key until all
digits are erased.
To Redial the Last Telephone Number Dialed
1) Pick up the handset. The SX5D is now "off-hook".
2) Press the REDIAL key.
To Receive a Call
When there is an incoming call, the SX5D rings, an incoming call
notification displays and blinks, and the LED blinks.
1) Pick up the handset or press the Speaker phone button.
Press the REJECT key to refuse the call. Your phone will stop
ringing, and the calling party will be disconnected.
2) Begin talking.
To Receive a Call When Caller ID is Activated
The Caller ID feature displays the caller's number when the SX5D
rings. If the caller's name and number are stored together in the
phonebook of your SX5D, the caller's name and number will be
displayed. Contact your service provider to activate this feature.
NOTE: If there is a missed call (call is not answered), "MISSED CALLS" will be displayed.

To End a Call

Hang up the phone (place the handset back onto the SX5D cradle).
NOTE: If the call is ended by the other party, the SX5D will clear the line and re-establish a dial
tone. The SX5D may be used for another call or may be hung up.

To Mute a Call

1) While in a call, press the MUTE button.
A message will notify you that the microphone is muted.
2) Press the MUTE button again to unmute the microphone.
To Put a Call on Hold
1) While in a call, press the MENU key.
2) Select Hold.
The display will change from Active to Held.
3) To activate the call, press the MENU key and select Retreive.
To Adjust Volumes
You can control the levels on your phone for the keypad tones and conversation volume (what
you hear through the handset or speaker) and the ring volume of an incoming call. You can also
turn the keypad tones on or off.
To Adjust External Speaker Volume
1) Press the Speaker key.
2) Press the UP/DOWN arrow keys accordingly to adjust volume.
To Adjust Handset Volume
1) Pick up the handset
2) Press UP/DOWN keys to adjust volume.
Phonecell SX5D
®
Placing a call.
Receiving a call
Receiving a call with Caller
ID activated.
Muted call
Call on hold
Handset/Speaker Volume
16 Technical Manual