Wall Mounting - Telular PHONECELL SX5D Technical Manual

Wall-Mounting
1) Remove the mounting clip from the cradle and re-insert it with the tab pointing up - see
Figures and .
Mounting Clip in
Cradle (tab up)
Figure – Handset
mounting clip assembly.
2) Mark two hole locations 83 mm (3-1/4 inches) vertically apart and drill two holes into the wall.
3) Install the screws (not supplied) into the wall, leaving a gap of approximately 3 mm
(1/8 inches) between the screw head and the wall.
4) Align the mounting holes with the screws and mount the SX5D onto the screws - see
Figures and.
Figure – SX5D mounting hooks.
Phonecell SX5D
®
Remove
Mounting Clip
from the Cradle
(tab down)
Figure – Handset mounting clip assembly for
wall-mount applications.
Mounting
Holes
Figure – Mount the SX5D onto the screws.
10
Insert
Mounting
Clip into
the Cradle
(tab up)
Technical Manual