Save To A File; Downloading In De Offline Mode; De Offline Parameterization - Honeywell ST 800 Series User Manual

•
Parameter Set 2 permits entering/editing the values for the LRL, URL, LRV, URV, PV
Units, Damping, SV Units, Line Filter frequency, Sensor Type, and the Conformity selection.
•
Parameter Set 3 is oriented primarily to the Honeywell SmartLine Temperature Transmitter
models for monitoring purposes.

Save to a File

Saving to a file in offline mode will let you add an edited configuration to a working file. Alternately,
if you decide not to save an edited configuration to the current file, you can select a new location and
file name for it. The default location and folder for saving configurations are SD Card and CFG
MCT. The default name of a new configuration is New1, which you can change for your needs.

Downloading in DE Offline Mode

Downloading a file to a Transmitter from the Toolkit requires a communicating connection between
the two units. Serial communication is established when you select DOWNLOAD to Device from
the Toolkit Select Device menu. When the download completes, confirmation will be required to
affirm that the configuration for the Transmitter is to be saved.

DE Offline Parameterization.

A table in Section 6, "Offline Configuration," of the MC Tookit User Manual, 34-ST-25-80 contains a
list of the basic ST 800 SmartLine Pressure Transmitter parameters for DE operation.
Page 22 ST 800 Series HART/DE Option User's Manual Revision 5.0