Kramer VS-44DT Quick Start Manual

KRAMER
VS-44DT HDMI/HDBT Matrix Switcher Quick Start Guide
This guide helps you install and use your VS-44DT for the first time. For more detailed information, g
http://www.kramerav.com/manual/VS-44DT to download the latest manual or scan the QR code on the left.
Step 1: Check what's in the box
VS-44DT HDMI/HDBT Matrix Switcher
IR remote control transmitter with batteries
Step 2: Install the VS-44DT
To mount the VS-44DT in a rack, attach both "ear" brackets to the device using the three screws on
each side of the device. Alternatively, attach the rubber feet to the bottom of the device and place it
on a table.
Step 3: Connect the inputs and outputs
Always switch off the power to each device before connecting it to your
For best results, always use Kramer high-performance cables to connect your AV equipment to the
IR IR
Emitter Sensor
Blu-ray Blu-ray
Disk Player TP-580Rxr
Disk Player
For optimum performance we recommend the Kramer BC-HDKat6a (CAT 6 23 AWG) cable. This specially built cable significantly
outperforms regular CAT 6/CAT 7a cables.
Step 4: Connect the power
Connect AC power to the rear of the VS-44DT, switch on its power and then switch on the
power on each device.
VS-44DT Quick Start (P/N: 2900-300470QS REV 1)
WWW.KRAMERAV.COM
Remote
Control
Display
1 Power cord
1 Quick Start Guide
VS-44DT .
Active
TP-580Rxr
Speakers
IR
Sensor
o to
1 Set of rack "ears"
4 Rubber feet
VS-44DT .
RS-232
Controller
Computer
Controller
P/N: 2 9 0 0 - 3 0 0 4 7 0 QS Rev:
1