Pan Id; Channel - Rae PGM62x6 User Manual

Note: When Roaming is on, you cannot change the instrument's PAN ID. When Roaming is on, the
"PAN ID" is not shown in the Wireless menu. To turn "PAN ID" back on:
1. In the Wireless menu, press [N/-] to scroll down to "Roaming."
2. Press [Y/+] to select "Roaming."
3. Press [Y/+] to select "Off."
4. Press [Y/+] to save the change.
Roaming is now off, and the "PAN ID" menu item is now visible and selected.
9.3.9.3

PAN ID

The MultiRAE and any other devices that you want to interconnect wirelessly must have the same PAN
ID. You can set the PAN ID in the instrument or through ProRAE Studio II. Note: When Roaming is
turned on, the PAN ID menu item is unavailable and therefore the PAN ID cannot be changed. To make
the menu item available and to change the PAN ID in the instrument, turn Roaming off.
1. Press [Y/+] to increase the number and [N/-] to advance to the next digit.
2. After moving to the last digit and making changes, press [MODE].

Press [Y/+] to save the change.

Press [N/-] to undo the change.
9.3.9.4

Channel

The MultiRAE and any other devices that you want to interconnect wirelessly must be operating on the
same channel.
1. Press [Y/+] to increase the number and [N/-] to advance to the next digit.
2. After moving to the last digit and making changes, press [MODE].

Press [Y/+] to save the change.

Press [N/-] to undo the change.
Note: You cannot change the channel setting on an instrument equipped with a radio modem that operates
at a frequency of 868 MHz.
75