Mio MiVue C380D Series User Manual page 17

SafetyCam
l
Sets how you want to be notified of safety cameras. The available settings
include:
Alert Sound: Turns on (Beep or Voice) or off (Mute) the alert sound.
l
Alert Distance: The system will alert you at a preset distance (Short,
l
Medium or Long) when a safety camera is detected.
Alert Method: Sets the alert distance function according to the current GPS
l
car speed (Smart Alert) or the speed limit (Standard Alert).
Threshold: Sets the speed value for the dash cam to start offering alerts.
l
Cruise Speed Alert: Sets the limit for the cruise speed. When you drive at a
l
cruise speed over the set value, you will receive alerts by the dash cam.
Custom SafetyCam: Lists all custom safety cameras which are sorted by the
l
created time.
Video Recording
l
Changes the settings of recording, including:
Video Clip Length: Sets the length of each video clip for a continuous
l
recording (1 min, 3 min or 5 min).
WDR: Enables the Wide Dynamic Range (WDR) function to improve the dash
l
cam's image quality under high-contrast lighting conditions.
EV: Sets the exposure level (-1 – +1) to adjust the brightness of the image.
l
The default setting is 0.
Frequency: Sets the frequency to match the flicker frequency of the local
l
power supply when recording.
G-Sensor Sensitivity: Sets the sensitivity level (6 levels, from Low to High)
l
of the G sensor that allows automatic triggering of the event recording while
continuous recording is in progress.
16