Roland V-Synth Owner's Manual page 117

01: Parametric EQ
(Parametric Equalizer)
This is a 4 band (low range, midrange x 2, high range) stereo
parametric equalizer.
fig.MFX-01
L
4-Band EQ
R
Parameter Value
Low Freq 50–4000 Hz
Low Gain -15– +15 dB
Mid 1 Freq 50–20000 Hz
Mid 1 Q 0.5, 0.7, 1.0, 2.0,
4.0, 8.0
Mid 1 Gain -15– +15 dB
Mid 2 Freq 50–20000 Hz
Mid 2 Q 0.5, 0.7, 1.0, 2.0,
4.0, 8.0
Mid 2 Gain -15– +15 dB
Hi Freq 2000–20000 Hz
Hi Gain -15– +15 dB
Total Gain -15– +15 dB
02: Graphic EQ (Graphic Equalizer)
This simulates a 12-band stereo graphic equalizer.
fig.MFX-02
L
12-Band
Graphic EQ
R
Parameter Value
180Hz Gain -15– +15 dB
250Hz Gain
355Hz Gain
500Hz Gain
710Hz Gain
1000Hz Gain
1400Hz Gain
2000Hz Gain
2800Hz Gain
4000Hz Gain
5600Hz Gain
8000Hz Gain
Total Gain #1 -15– +15 dB
Description
Frequency of the low range
Gain of the low range
Frequency of the middle range 1
Width of the middle range 1
Set a higher value for Q to nar-
row the range to be affected.
Gain of the middle range 1
Frequency of the middle range 2
Width of the middle range 2
Set a higher value for Q to nar-
row the range to be affected.
Gain of the middle range 2
Frequency of the high range
Gain of the high range
Output Level
Description
Gain of each frequency band
Output Level
03: Resonant Filter
It allows for cyclical control of the cutoff frequency using an LFO. It
allows you to make drastic changes in the frequency response of the
input signal by the cutoff frequency and feedback, making the sound
brighter or darker, or giving it a distinctive character.
fig.MFX-03
L
Resonant
Filter
R
Parameter Value
Cutoff Freq 50–20000 Hz
Resonance 0–127
Band Mode LOW, MID,
HIGH,
LOW+MID,
MID+HIGH,
ALL
Sweep Wave- TRI, SAWUP,
form SAWDN, SQR
SAWUP
Sweep Rate 0.05–10.0 Hz,
note
Sweep Depth 0–127
Balance DRY100:0WET–
DRY0:100WET
Effects List
Description
Basic frequency of the filter
The LFO will control the cutoff
frequency with this value as its
maximum level.
Filter's resonance level
Raising the setting increases res-
onance near the cutoff frequen-
cy, producing a uniquely
characteristic sound.
Frequency range to which the
filter will be applied
LOW: low frequency band
MID: mid-range frequency
HIGH: high frequency
LOW+MID: low and middle
range frequency
MID+HIGH: middle and high
range frequency
ALL: all ranges
LFO waveform
TRI: Triangle wave
SAWUP: Sawtooth Wave
SAWDN: Sawtooth Wave
SQR: Square wave
SAWDN
Frequency of the LFO modula-
tion
Modulation depth of the LFO
Volume balance between the di-
rect sound (DRY) and the effect
sound (WET)
117