Creating The Safety Program - Siemens SIMATIC PCS 7 Operating Manual

Configuring the safety program

7.2 Creating the safety program

7.2 Creating the safety program
Requirements
● You must have created a project structure in the SIMATIC Manager.
● Prior to programming, you must have configured the hardware components of your
project, in particular the F-CPU and the F-signal modules, for safety mode.
● You must have assigned your safety program to a CPU 41x-xH.
Library
The F-user blocks must always be used for configuration.
80
Compendium Part B - Process Safety (V8.2)
Operating Manual, 07/2016, A5E35031794-AB