Table of Contents
Advertisement
Creating a Patch
By pressing [7 (Compare)] you can check the save-destination
patch (Compare function).
6. Press [8 (Execute)].
The display will indicate Are you sure?."
7. Press [8 (OK)] to execute the save operation. To cancel the
operation, press [EXIT].
Auditioning the Save-Destination
Patch (Compare)
Before you save a patch, you can audition the patch which currently
occupies the save destination to make sure that it is one you don't
mind overwriting. This can help prevent important patches from
being accidentally overwritten and lost.
1. Follow the procedure in "Saving Patches You've Created
(Write)" through step 5 to select the save destination.
2. Press [7 (Compare)].
The Patch Compare window appears, making it possible to
sound the currently selected save destination patch.
fig.03-10.e
3. Play the keyboard to sound the save destination patch, then
check whether you really want to overwrite it.
The patch auditioned using the Compare function may sound
slightly different than when it is played normally.
4. If you wish to change the save destination, re-specify the
save-destination patch by using [INC]/[DEC].
5. Press [7 (Write)] to return to the Patch Write window.
6. Press [8 (Execute)] once again to execute the Save
operation.
Registering a Favorite Patch
(Favorite Sound)
You can bring together your favorite and most frequently used
patches in one place by registering them in the Favorite sound. By
using this function you can rapidly select favorite patches from
internal memory or a Wave Expansion Board. You can register a
total of 64 sounds (8 sounds x 8 banks) as favorite sounds.
For details on selecting a favorite sound, refer to "Selecting
Favorite Patches (Favorite Sound)" (p. 33).
46
Save-destination patch
Using [1]–[8] to Register
1. Access the PATCH PLAY screen, and select the patch that
you wish to register (p. 32).
2. Hold down [JUMP (BANK)] and press a [1]–[8] to select the
bank in which you wish to register the sound.
3. Hold down [SHIFT (REGISTRY)] and press a [1]–[8] to select
the button at which you wish to register the sound.
The display will indicate "Register OK?."
4. Press [8 (OK)] to execute the registration. To cancel the
operation, press [EXIT].
Using the Favorite List Window to
Register
1. Access the PATCH PLAY screen to select the patch that you
wish to register (p. 32).
2. Make sure that you are in the PATCH PLAY screen, and that
the cursor is located at the patch group or the patch
number.
3. While holding down [SHIFT], press [LIST]
The Favorite List window appears.
fig.02-04_50
4. Press
to move the cursor to the "Bank 1–8" tab, and
press
or
to select the bank in which you wish to
register the patch.
5. Press
to move the cursor within the list, and
press
or
to select the number to which you wish to
register. The number you select here corresponds to [1]–[8].
6. Press [5 (Regist)] to execute the registration.
• By pressing [6 (Remove)] you can cancel the patch registration
that is selected in the Favorite List window.
• By pressing [7 (Prevu)] you can audition the sound of the
registered patch (Phrase Preview).
7. When you have finished registering favorite sounds, press
[EXIT] to close the Favorite List window.
Advertisement
Table of Contents
