Roland Piano Owner's Manual page 214

Changes in the Recording Standby window and how to start recording
See p. 129 in the Owner's Manual
In the Recording Standby window, the functions assigned to the [1]–[8] buttons have been expanded and modified.
Recording Standby window before the change
Button name Function
[3 (Metronome)] Open the Metronome window
[4 (RecSel)] Open the Recording Select window
[8 (Start)] Start recording (the Realtime Recording window
will appear)
[STOP/PLAY] Start recording (the Realtime Recording window
*Outside the Recording will not be displayed)
Standby window
Switching between Recording and Rehearsal modes, and showing or hiding the
Realtime Recording window
See left column on p. 132 in the Owner's Manual. The operating procedure in "Auditioning Sounds
or Phrases While Recording (Rehearsal Function)" has changed.
When the Recording Standby window is displayed, pressing [8 (Start)] causes recording to begin with the Realtime Recording
window displayed, while pressing [STOP/PLAY] causes recording to begin without the Realtime Recording window
appearing. Subsequently, you can switch between recording and rehearsal modes, and between showing/hiding the Realtime
Recording window as shown in the diagram below.
Recording (with the Realtime Recording window displayed)
Recording (with the Realtime Recording window hidden)
Recording
Press [8 (Rehersl)]
Press [8 (Record)]
Press [REC]
Recording
Hold down [SHIFT]
and press [REC]
Recording Standby window following the change
Settings in the Metronome window are linked with the
Sequencer group settings in the System Edit window.
Rehearsing (with the Realtime Recording window displayed)
Rehearsing (with the Realtime Recording window hidden)
Rehearsing
Press [REC]
Rehearsing
40455589 '01-11-C3-21N