Table of Contents
Advertisement
5.Editing Recorded Performances
6.
Use the [Fwd] and [Bwd] buttons to choose the number of measures to delete, start-
ing from the measure where Delete begins.
We will delete five measures, from six through ten, so choose "5."
* Choose "ALL" when you want to delete everything up to the last bar of the song.
If you wish to cancel the operation at this point, press the [Function] button, and the but-
ton's indicator will stop blinking.
7.
Press the [Rec] button, and the [Function] button indicator will go out.
Measures 6~10 have been deleted, so after measure 5 is played, the performance will pick
up at measure 11.
Inserting Blank Measures—Insert (Edit 5)
With this editing function, you can insert blank measures wherever you want in perfor-
mance data.
When you use the Insert operation, blank measures are inserted on all tracks.
Ex.: Inserting Blank Measures From the Sixth Through the Tenth Bar
Composer
e t
awnate:
ee
Cc
Rhythm Whole AG@SHp Lower
Upper
Z
ty
&
5
S.C
CX)
Song
F
2
3
4
v
Reset
Stop
Bwd = Fwd
5
2 OCS
ISS
1.
Press the [Function] button (the indicator should begin blinking).
2.
Press the Song [A] and [¥] buttons until "Ed.5" appears in the display window.
rit
roo
3.
Press the [Rhythm] button.
4,
Use the [Fwd] and [Bwd] buttons to find the number of the measure from which you
wish to insert the empty bars. Choose "6."
At this time, the display reads "End" when the end of the song is reached.
* Selecting "End" for the first bar to be insert a blank measure makes it be not in active.
5.
Press the Composer [Whole] button.
6.
Use the [Fwd] and [Bwd] buttons to choose the number of measures to insert, start-
ing from the measure from which the insertion is to begin.
Since we will insert five measures, from six through ten, choose "5."
* Choose "ALL" when you want to inserted a blank measure everything up to the last
bar of the song.
If you wish to cancel the operation at this point, press the [Function] button, and the but-
ton's indicator will stop blinking.
7.
Press the [Rec] button, and the [Function] button indicator will go out.
Blank measures have been inserted for bar six through ten, so after the blank mea-
sures, the performance continues at measure 11.
46
Advertisement
Table of Contents
