Table of Contents
Advertisement
Changing the Parts Assigned to the Track
Buttons During SMF Playback (Track Assign)
Normally, when playing back Roland Piano Digital-compatible SMFs (p. 181), the
left-hand part is assigned to the [3/Lower] button, and the right-hand part is
assigned to the [4/Upper] button. However, assignment of the right-hand and left-
hand parts may differ with some SMF data.
If you cannot get the right-hand and left-hand parts to work well set on "Auto," then
change the setting to "2/1 Part" or "3/4 Part."
1.
Press the [Menu] button.
The Menu screen appears.
Touch
to switch the screens.
2.
Touch <Track Assign>.
A screen like the one shown below appears.
fig.d-trkasgn.eps_60
3.
Touch
to select the setting.
Display
The part assigned to each track will be determined automatically,
Auto
depending on the song data.
Part 1 will be assigned to the right-hand track, part 2 to the left-hand
2/1 Part
track, and part 3 to the user track.
Part 4 will be assigned to the right-hand track, part 3 to the left-hand
3/4 Part
track, and part 1 to the user track.
4.
Touch <Exit> to return to the Menu screen.
After changing this setting, try selecting the song once again.
For more detailed information about selecting a song, refer to "Playing a Song" (p.
65).
Chapter 3 Song Playback and Practice Functions
Explanation
When you select this parameter,
the message "OK to delete
song?" may be displayed. Refer
to "If the following screen
appears" (p. 90).
This setting is effective with
SMF format song data.
This is not effective with the
internal songs.
89
Advertisement
Table of Contents
