Changing The Parts Assigned To The Track Buttons During Smf Playback (Track Assign) - Roland KR-115 Owner's Manual

→ The screen may be switched when you press the button while
the Lyrics screen is displayed. To have the lyrics displayed
again, touch < > on the Piano or Basic screen, or stop
playback of the song, then press the [
button.
■ Changing the Parts Assigned
to the Track Buttons During
SMF Playback (Track Assign)
Normally, when playing back Roland Piano Digital-
compatible SMFs (p. 217), the lower part is assigned to the
[3/Lower] button, and the upper part is assigned to the [4/
Upper] button. However, assignment of the upper and lower
parts may differ with some SMF data.
If you cannot get the upper and lower parts to work well set
on "Auto," then change the setting to "2/1 Part" or "3/4
Part."
→ This setting can be used with songs stored in external memory
and on CDs, and songs in SMF format. The setting does not
work with internal songs or songs registered to the Favorites.
1.
Press the [Menu] button.
The "Composer Menu" or the "A/V Sync" screen
appears.
Touch to switch the screens.
2.
Touch <Track Assign>.
A screen like the one shown below appears.
fig.d-trkasgn.eps_60
3.
Touch to select the setting.
Display
Auto
(Play/Stop)]
2/1 Part
3/4 Part
4.
Press the [Exit] button to return to The "Composer
Menu" screen.
After changing this setting, try selecting the song once
again.
For more detailed information about selecting a song,
refer to "Playing a Song" (p. 75).
Chapter 10 Various Settings
Explanation
The part assigned to each track will be
determined automatically,
depending on the song data.
Part 1 will be assigned to the upper part
track, part 2 to the lower part track, and part
3 to the user track.
Part 4 will be assigned to the upper part
track, part 3 to the lower part track, and part
1 to the user track.
183