Table of Contents
Advertisement
Performing in Ensemble with
MIDI Instruments
(MIDI Ensemble)
You can connect an electronic percussion device or other
MIDI instrument to the KF-7's MIDI In connector for
ensemble playing. Making the MIDI settings for the
instrument connected to the MIDI In connector is easy. The
sounds from the connected MIDI instrument are played from
the KF-7's speaker.
1.
Switch to the Basic screen, or press the One Touch
Program [Piano] button.
2.
Touch <Functions>.
3.
Touch <MIDI Ensemble>.
A screen like the following appears.
fig.09-04.eps
4.
Select the method for using the MIDI In connector.
Displayed
Meaning
Normal setting. Make changes in Tone and
Normal
other settings from the connected device.
Select this when you have percussion pads
(such as Roland's SPD-20 Total Percussion
Pad) connected to the KF-7's MIDI In con-
nector. You do not need to make any MIDI
Pad
settings on the KF-7. Select pad Tones and
make other settings from the connected pads
(for further details, refer to the Owner's
Manual provided with the pads).
Select this when you have a keyboard (such
as a Roland A-37 or AX-7 MIDI Keyboard
Controller) connected to the KF-7's MIDI In
Keyboard
connector. You can select tones for the con-
nected keyboard from the KF-7. No MIDI
settings need be made on the KF-7.
5.
When "Keyboard" is selected in Step 4 above, use
to select the Tone.
The connected keyboard plays using the selected Tone.
Chapter 9 Connecting External Devices
MIDI Settings
With the KF-7, you can make MIDI settings like those
described below.
"MIDI Setting Screen"
fig.09-04.eps
Display
Description
Chooses the MIDI send channel
Tx Channel
(p. 156).
Switches Local Control on or off
Local Control
(p. 156).
"Program Change Screen"
fig.09-04.eps
Display
Description
Sends Bank Select MSB messages.
Bank Select MSB
(p. 156)
Sends Bank Select LSB messages.
Bank Select LSB
(p. 156)
Sends Program Change messages
Program Change
(Program Numbers). (p. 156)
155
Advertisement
Table of Contents
