Roland FP-7 Owner's Manual page 128

Various Settings
6.
Use the [-] [+] buttons to select the audio file
that will be played by the specified key.
If you press the [-] [+] buttons simultaneously, the
audio file assigned to that key will be cleared.
No playback mode indication is shown on the
graphic for keys to which no audio file is assigned,
and the audio file name field will indicate "No
Assign."
7.
While holding down the [Display] button,
press the [+] button to select the playback
status (Play Mode) indication.
8.
Use the [-] [+] buttons to select the playback
status (Play Mode).
Indication
When you press the key, the audio file will
One-shot
play only once.
Now
The audio file will play immediately when you
press the key.
When you press the key, the audio file will be
One-shot
played once when the currently playing
Wait
audio file finishes playing.
When you press the key, the audio file will
Loop Now play repeatedly. The audio file will play
immediately when you press the key.
When you press the key, the audio file will be
Loop Wait played repeatedly when the currently playing
audio file finishes playing.
128
Description
9.
Press the [Display] button to complete the
setting.
The following screen appears
If you want to overwrite the settings using the changes
you made, holding down the [Display] button and press
the [+] button to select "OK," then press the [Rec] button.
If you decide not to apply the changes you made,
holding down the [Display] button and press the [-]
button to select "Cancel," then press the [Rec] button.
If you've modified the audio file settings but have not
written your changes onto the settings, the following
screen will appear when you attempt to access the
Audio Key Assign screen.
If you want to select the audio file from before you made
the changes, holding down the [Display] button and
press the [+] button to select "OK," then press the [Rec]
button.
If you want to recall the changes you made, holding
down the [Display] button and press the [-] button to
select "Cancel," then press the [Rec] button.