Error Messages - Roland FP-7 Owner's Manual

Error Messages

Indication
Error: 1 You can only read the music file. It can not be saved.
An error occurred during writing.
Error: 2 The external media's protect tab may be in the "Protect" (writing prohibited) position, or the external media
may not yet be initialized.
Error: 10
No external media is inserted. Insert the external media and try again.
There is not sufficient free memory in the save destination.
Error: 11
Delete unneeded files (Songs or Registration Sets) you've saved in internal memory and try again.
An error occurred during writing. The external media may be corrupted.
Error: 14
Insert other external media and try again. Alternatively, you can initialize the external media.
Error: 15 The file is unreadable. The data format is not compatible with the FP-7.
Data was not called up in time for playback of the song.
Error: 16
After waiting several seconds, you may be able to play back the song by pressing the [Play] button again.
This audio format is not supported.
Error: 18
Please use 44.1 kHz 16-bit linear WAV format audio files.
Error: 30 The internal memory capacity of the FP-7 is full.
The FP-7 cannot deal with the excessive MIDI data sent from the external MIDI device.
Error: 40
Reduce the amount of MIDI data sent to the FP-7.
A MIDI cable has been disconnected.
Error: 41
Connect it properly and securely.
A MIDI transmission error has occurred.
Error: 43
Check the MIDI cable and connected MIDI device.
There may be a problem with the system.
Error: 51 Repeat the procedure from the beginning. If it is not solved after you have tried several times, contact the
Roland service center.
The External Memory connector was subjected to excessive current.
Error: 65
Make sure that there is no problem with the external media, then turn the power off, then on again.
* External Media: USB memory, etc.
* Press [Display] button, and you can cancel the error message.
Meaning
157