Changing The Volume Of The Session Partner Performance; Selecting Parts - Roland FP-7 Owner's Manual

Changing the Volume of the Session Partner Performance

Here's how to adjust the volume when Session Partner is playing.
While holding down the [Session Partner] button, press the [-] or [+]
1.
button.
fig.d-SPvolume.eps

Selecting Parts

You can select the part to be played.
1. Press the [Session Partner] button so Session Partner starts playing.
2. Press the Track [1] button.
The part or group of parts enabled for performance changes each time you press the Track [1]
button, as shown below.
Lit in red
Lit in orange
Lit in green
Stopping the Session Partner Performance
Press the [Session Partner] button.
1.
When you press the [Session Partner] button, an ending will be played and then Session Partner
will stop.
While you hold down the [Session Partner] button, the display will show the volume of
Session Partner.
You can also adjust the volume of the Session Partner by turning the [Balance] knob
while you hold down the [Session Partner] button.
Track [1] button The parts that will play
Drums, Bass, Accompaniment
Drums, Bass
Drums
Playing Along with Rhythms
69