Table of Contents
Advertisement
Listening to a Demo Song
Selecting a song (Song Select)
Upon power-up, the song that was selected before the power
was turned off is selected, and the data of that song is loaded.
As soon as the data has been loaded, the Play screen appears
in the display.
To listen to a demo song, follow the procedure given below.
fig.00-312
1. Press [UTILITY].
2. Press CURSOR [
] [
and press [ENTER].
The Song Select screen appears.
fig.00-313d
3. Turn the TIME/VALUE dial to select "01: SOLOBANG."
Title
Composer
SOLOBANG!
Yutaka Nakano
4. Press [ENTER].
1
3
2,4
2
] to move the cursor to "SEL,"
Copyright
Copyright © 2005
BOSS Corporation
■ If you have changed the recording or editing
Since the BR-900CD automatically updates the recorded data
and operation content if the recording or editing have been
changed, you do not need to perform any special operations
for saving.
During updating, "Keep power on!" appears in the upper
line of the display, while the lower line shows what is being
processed.
* If you try to record or edit data using a protected demo song,
"Protected!" appears.
Playing back a song
1. Move the TRACK faders 1–6, 7/8 and the RHYTHM
fader to the positions shown in the figure below, and
lower the MASTER fader.
fig.00-315
2. Press [PLAY].
fig.00-316
The song starts. Slowly increase the MASTER fader and
adjust the volume to the desired level.
Use of the demo song supplied with this product for any
purpose other than private, personal enjoyment without the
permission of the copyright holder is prohibited by law.
Additionally, this data must not be copied, nor used in a
secondary copyrighted work without the permission of the
copyright holder.
By adjusting the TRACK faders, you can listen to the
individual sounds recorded to each track one at a time or
listen to them at the balance you desire.
Press [FF] to fast-forward the song and press [REW] to
rewind the song. Press [ZERO] to move to the time
location 00:00:00-00.0.
29
Advertisement
Table of Contents
