Table of Contents
Advertisement
Editing the Performance on a Track (Track Editing)
fig.02-341d
4. Turn the TIME/VALUE dial to select "AB" and press
[ENTER].
fig.02-342d
5. Use CURSOR [
] [
select the track/V-Track to erase from.
6. When you are ready to execute the erasure, press [ENTER].
The display will ask "Are you sure?," so that you can
confirm the operation.
7. Press [ENTER].
The erasure is executed.
8. Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
* During updating, "Keep power on!" appears in the upper line
of the display, while the lower line shows what is being
processed.
74
] and the TIME/VALUE dial to
Erasing by specifying the time
(TME/MES)
Perform the procedure given below to erase the portion
between specific times.
fig.02-343
START
1. Press [UTILITY].
2. Press CURSOR [
] [
and press [ENTER].
fig.02-334d
3. Press CURSOR [
] [
and press [ENTER].
fig.02-345d
4. Turn the TIME/VALUE dial to select "TME/MES" and
press [ENTER].
fig.02-346d
END
Time
] to move the cursor to "TRK,"
] to move the cursor to "ERS,"
Advertisement
Table of Contents
