Creating A Master Tape / Disc; Recording To A Cassette Tape Recorder (Analog Connection); Recording To A Digital Recorder (Digital Connection); Disabling Digital Copying (Digital Copy Protect) - Roland BR-900CD Owner's Manual

Creating a Master Tape / Disc

This process involves recording the finished song to your
recorder (cassette tape recorder, CD recorder, etc.) and
making a master tape or a master disc.
Recording to a Cassette Tape
Recorder (Analog Connection)
1. Connect the BR-900CD's LINE OUT jacks to the
cassette tape recorder's input jacks.
fig.02-501a
Cassette tape
Recorder
2. Put the cassette tape recorder in record mode.
3. Press [PLAY] on the BR-900CD and start the playback
of the recorded data.
80
Recording to a Digital
Recorder (Digital Connection)
1. Connect the BR-900CD's DIGITAL OUT connector to
the digital recorder's input connector.
fig.02-501b
Digital Recorder
(CD Recorder etc.)
2. Set the digital recorder so it is ready to record digital
signals.
3. Put the digital recorder in record mode.
4. Press [PLAY] on the BR-900CD and start the playback
of the recorded data.
Disabling digital copying (Digital
Copy Protect)
When recording from the BR-900CD to a digital recorder,
you can prevent further digital copying of the master tape or
disc to any other digital recorders.
1. Press [UTILITY].
2. Press CURSOR [
] [
and press [ENTER].
fig.02-501d
] to move the cursor to "EDT,"