Rehearsing Recordings - Roland BR-900CD Owner's Manual

Creating Original Patterns
* When a coarse Quantize setting is used, the ▼ mark may
indicate half-note or quarter-note timing.
fig.03-405
Ex.)
CLOSED HH
SNARE
KICK
• Q (Quantize) =
• Q (Quantize) =
fig.03-405a
Ex.)
CLOSED HH
SNARE
KICK
• Q (Quantize) =
When using high-resolution Quantize settings, you may
be unable to view the entire pattern, from start to finish,
in the display at one time.
In such instances, a "
that there is material not currently displayed.
fig.03-405b
You can press [REC MODE] during Realtime
Recording to switch to Step Recording.
Using this option allows you to switch to Step
Recording temporarily when you want to change the
set velocity or input drum sounds input with the
wrong timing in Realtime Recording (instructions for
this procedure: p. 132), or to delete unneeded drum
sounds (instructions: p. 132), and then switch back to
Realtime Recording and continue recording the
pattern.
8. Set the tempo and Quantize values as needed.
9. When you have finished inputting sounds, move the
cursor to "STOP" and press [ENTER].
* You can also stop recording by pressing [STOP].
128
" symbol appears, indicating

Rehearsing recordings

You can practice (rehearse) your performances along with
the metronome before carrying out Realtime Recording.
During rehearsals, the drum sounds are only played, and are
not recorded to the pattern even if you press the track
buttons.
1. Press [ARRANGE/PATTERN/OFF] repeatedly until the
indicator is flashing.
fig.03-411d
2. Press [EDIT].
fig.03-407d
3. Press [CURSOR] to move the cursor to "REAL," and
press [ENTER].
"REAL" appears in REC MODE at the left of the screen.
The Recording Standby screen appears.
fig.03-408d
4. Press CURSOR [
] repeatedly to move the cursor to
"RHR," and press [ENTER].
The BR-900CD is put into Rehearsal mode.
fig.03-409d