Copying A Rhythm Set - Roland XV-88 Owner's Manual

Chapter 10. Memory Settings (Utility Mode)

Copying a Rhythm Set

To copy the Rhythm Set settings, press [UTILITY] in Rhythm
Set mode and perform Copy operation.
Rhythm Tone Copy
Individual Rhythm Tone (percussion sound) settings
assigned to each key will be copied to each key in the current
Rhythm Set.
fig.10-17.e
Copy source Rhythm Set
(group, number)
Copy source Key
The copy source and copy destination Key parameters
can also be set by pressing a key on the keyboard.
When the Copy operation is executed, an * symbol will be
displayed in front of the copy-destination key.
For more detailed information and instructions for this
procedure, refer to "Copying the Settings of Another
Rhythm Tone (Rhythm Tone Copy)" (p. 94).
Rhythm Set Effects Copy
You can copy the effect settings from any Performance, Patch
or Rhythm Set into the currently selected Rhythm Set.
fig.10-18.e
Copy source
Press to move to the next display, and then select the
contents of the effect that you wish to copy.
fig.10-19.e
Copy type
ALL: Multi-effects, Chorus, and Reverb settings
MFX: Multi-effects settings
CHORUS: Chorus settings
REVERB: Reverb settings
CHO&REV: Chorus and Reverb settings
184
Copy source
Rhythm Set name
Copy destination Key
Copy source Performance/
Patch/Rhythm Set
(group, number, name)
For more detailed information and instructions for this
procedure, refer to "Copying Another Effect Setting
(Effects Copy)" (p. 161).
The Compare Function
For the Rhythm Tone Copy and Rhythm Set Effect Copy
operations, you can use the Compare function.
The Compare function allows you to play the copy-
source Rhythm Set. To play the Rhythm Set of the copy
source, press [UNDO/COMPARE] to access the
RHYTHM COMPARE page. The new Rhythm Set can
also be selected from this page—however, it is not
possible to select patches from CD-A–H or XP-A–D.
After selecting the Rhythm Set, return to the previous
page by pressing [UNDO/COMPARE] or [EXIT].
fig.10-08a.e
Copy source Rhythm Set (group, number, name)
• The Compare function cannot be used with Rhythm
Tone Copy if either TEMP, a CD-A–H/XP-A–D
Rhythm Set is selected as the copy-source Rhythm
Set.
• The Compare function cannot be used with Rhythm
Set Effect Copy if PERFORM is selected as the copy
source.
• The Rhythm Set auditioned using the Compare
function may sound slightly different than when it is
played normally.
Rhythm Set Name Copy
You can copy the name of a Rhythm Set to the current
Rhythm Set.
fig.10-20.e
Copy source Rhythm Set (group, number, name)