Chapter 8. Saving Sounds
Modifications you make to a sound are temporary, and will
be lost when the power is turned off, or when another
Performance, Patch or Rhythm Set is selected. If you wish to
keep the modified Tones, perform the Save operation.
If the settings of a Performance, Patch, or Rhythm Set have
been modified, a * symbol will appear at the left of the group
in the corresponding PLAY page, indicating that the data has
been modified. After you save the data to the XV-88 (user
memory), the * symbol will disappear.
fig.03-03
There are three methods for saving Tones.
Saving to Internal Memory
Saving to an External MIDI Device
(p. 166)
Saving a Group of Tones to a Memory
Card
(p. 167)
162
About Memory
Patch and Performance settings are stored in what is referred
to as memory. There are three kind of memory: temporary,
rewritable, and non-rewritable.
fig.08-01.e
XV-88
Preset B (PR-B)
Preset A (PR-A)
Performance
(p. 164)
Rhythm Set
* 1 Only in PR-A and B
* 2 The selected Patches/Rhythm Sets cannot be changed.
* 3 Only the Performances/Patches/Rhythm Sets in the CD-A--H
group can be selected.
Preset F (PR-F)
Preset E (PR-E)
Preset D (PR-D)
Preset C (PR-C)
Preset H (GM2)
32
* 1
Patch
Patch
128
256
Rhythm Set
2
9
Select
Select
* 2
Temporary Area
Select
EXP D Slot (XP-D)
EXP C Slot (XP-C)
EXP B Slot (XP-B)
EXP A Slot (XP-A)
Patch
Rhythm Set
Expansion Board
System
User (USER)
Performance
64
Patch
128
Rhythm Set
4
Select
Write
Select
* 3
Data File (.SVD)
Performance
64
Load
Patch
128
Save
Rhythm Set
4
System
Memory Card