Copying A Measure - Roland KF-90 Owner's Manual

Copying a Measure

You can copy a portion of a performance to a different bar in
the same Part or to a measure in another Part. This is handy
when you're composing a song that repeats a similar phrase.
fig.06-07
Ex. To copy measure 5-7 to measure 8.
1 2 3 4 5
1 2 3 4 5
1.
Follow the steps in "Choosing an Editing
Function" (p. 124) to choose <Copy>.
The following screen will appear.
fig.06-08.eps
Display Description
From The first measure in the passage you want to copy
For The number of measures to copy
Src Track button or Part number of the copy source
Choosing "All" copies all Parts. When you do this,
<Dst> changes to "- - -."
Choosing "R.Pattern" copies the KF-90's built-in
Rhythm Patterns. For more information, take a
look at "Copying a Rhythm Pattern" (p. 126).
If you choose a Track button, you can only copy to
the selected Track button.
Track button or Part number of the copy
Dst
destination
Mode Copy type
There are three types of copying, which are
described below.
"Replace"
When a recorded performance exists at the copy
destination, the previous recording is deleted and
replaced with the copied passage.
6 7
6 7 8 9 10
Chapter 6 Editing Functions
"Mix"
When a recorded performance exists at the copy
destination, the newly copied passage is mixed
with the previous recording. When the Tones of
the copy source and destination are different, the
Tone of the destination is used.
"Insert"
When a recorded performance exists at the copy
destination, the newly copied passage is inserted
without deleting the previous recording. This
makes the song longer by an amount equal to the
number of inserted measures.
To The measure number of the copy destination
Choosing "End" copies to the end of the song.
Times The number of times to copy
2.
Touch the screen to choose the item you want to
make the setting for.
3.
Use the Value [-] [+] buttons or the dial to set the
item.
To cancel copying, touch <Exit>.
The copy is canceled, then you are returned to the Song
Edit screen.
4.
When you're done making all the settings, touch
<Execute>.
Copying starts.
When copying is done, you are returned to the Song Edit
screen.
125