Basic Screen - Roland KF-90 Owner's Manual

Basic Screen

The following screen is called "Basic Screen."
You can usually display this screen by touching <Exit> in the display several times.
If touching <Exit> doesn't display this screen, follow either of the procedures described
below to display it.
• Press the One Touch Program [Arranger] button.
The basic screen appears and displays the settings for Automatic Accompaniment.
• Hold down the One Touch Program [Piano] button and press any one of the Tone
Select buttons, then touch <Exit>.
fig.00-11
Tone Part
Name
1
2
3
4
Using the Main Icons
With the KF-90, you can many other screens besides the basic screen to do things. The
main icons you can use on these screens are as follows.
* You can adjust the contrast of the screen. Check out "Adjusting the Contrast of the Screen" (p.
153).
* The explanations in this manual include illustrations that depict what should typically be shown
by the display. Note, however, that your unit may incorporate a newer, enhanced version of the
system (e.g., includes newer sounds), so what you actually see in the display may not always
match what appears in the manual.
1
Tempo
2
3
Such as the name of the song and Music Style appears.
The Tone names are selected appear.
Information about the Automatic Accompaniment, such as the form of
each of the chords as they are played and icons are shown in the dis-
play. Information about the manner in which the chords are played is
not displayed when Automatic Accompaniment is not being used.
The on-screen graphics that appear three dimensional work like but-
tons. These are called "Icons."
Some screens consist on two or more pages.
You can display the next page or the previous page of the screen
by touching Page <
Touch this to exit the screen that is currently displayed.
You can usually display the Basic screen by touching <Exit> sev-
eral times.
Beat Measure
4
> or < >.
Before You Play
19