Table of Contents
Advertisement
Error Message
Indication
Meaning
Error: 1
You can only read the music file. It can not be saved.
An error occurred during writing. The storage media's protect tab may be in the "Protect" (writing prohibited)
Error: 2
position, or the storage media may not yet be initialized.
Error: 10
No storage media is inserted. Insert the storage media and try again.
There is not sufficient free memory in the save destination. Either insert other storage media or delete
Error: 11
unneeded files and try again.
An error occurred during writing. The storage media may be corrupted. Insert other storage media and try
Error: 14
again. Alternatively, you can initialize the storage media.
Error: 15
The file is unreadable. The data format is not compatible with the HPi-6.
Data was not called up in time for playback of the song. After waiting several seconds, you may be able to play
Error: 16
back the song by pressing the [
Error: 17
The selected image data cannot be displayed. Prepare image data that can be used with the HPi-6 (p. 83).
Error: 30
The internal memory capacity of the HPi-6 is full.
The HPi-6 cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the amount
Error: 40
of MIDI data sent to the HPi-6.
Error: 41
A MIDI cable has been disconnected. Connect it properly and securely.
Error: 43
A MIDI transmission error has occurred. Check the MIDI cable and connected MIDI device.
There may be a problem with the system. Repeat the procedure from the beginning. If it is not solved after you
Error: 51
have tried several times, contact the Roland service center.
The External Memory connector was subjected to excessive current. Check the storage media to confirm that
Error: 65
no damage has occurred to it.
104
(Play/Stop)] button again.
Advertisement
Table of Contents
