Table of Contents
Advertisement
Connecting to Other Devices
Making the Settings for the
USB Driver
If you connect the HPi-6 to a computer using the USB connector, you
need to make the following setting before you make the connection.
In the original settings, "Original" is selected.
Normally, there is no need to change the USB driver settings.
1.
Press the [Menu/Lesson] button.
The Menu screen appears.
2.
Press the
cursor button to select <Functions>, then
press the [
] button.
The "Functions" screen appears.
3.
Press the
cursor button to select <USB Driver>,
then press the [
] button.
The "USB Driver" screen appears.
4.
Press the
cursor up or down button to select the
USB driver.
Item
Explanation
Select this when using a generic USB driver
Generic
included with the OS with a USB connection.
Select this when using the supplied driver
(Roland Digital USB Driver) with a USB
Original
connection.
Under ordinary circumstances, use this mode.
This is an auxiliary mode.
Original2
It is not normally used.
5.
Turn the HPi-6's volume to the minimum level, switch
off the power, then turn it back on again.
100
Advertisement
Table of Contents
