Roland Music ATELIER AT500 Owner's Manual page 244

Roland organ owner's manual
Hide thumbs Also See for Music ATELIER AT500:
Table of Contents

Advertisement

Troubleshooting
No Sound is Heard
Problem
No sound is heard
Lower keyboard cannot be heard
Upper keyboard cannot be heard
No sound is heard (when external
devices are connected)
There is no sound from the twelve
keys at the right of the lower
keyboard
242
Check
The [Master Volume] slider is set too
low.
Headphones are connected.
When you connect the headphones,
the sound is heard only through the
headphones.
The plug is still plugged into the
headphone jack.
The volume is set too low on the Level
[▲] [▼] buttons.
The volume is set too low on the
Expression Pedal.
You do not have a Voice selected.
Drums/SFX are selected for the Lower
keyboard, but you are playing a key to
which no drum sound is assigned.
The Lower keyboard will not produce
sound while an Intro or Ending is being
played.
"Percussion Set 3" has been selected
for the Upper keyboard.
When "Percussion Set 3" is selected,
some keys may have no sound
assigned to them.
The power of the connected external
devices is not turned on.
The V-LINK function is set Mode 2.
When V-LINK setting is Mode 2, the
group of twelve keys starting at the
very right of the lower keyboard are
used for controlling video images.
Therefore, no sounds are played even
when you press these keys.
Solution
Turn the [Master Volume] knob toward
"Max."
If you want sound to be output from the
speakers, disconnect the headphones.
Disconnect the plug from the headphone
jack.
Press the Level [▲][▼] buttons to raise the
volume.
Advance the expression pedal.
Press a voice button to select a voice.
Voices that have their button indicator lit
can be played.
Turn the Drums/SFX off or play keys to
which drums sounds are assigned.
This is not a malfunction.
For the upper keyboard, select a voice
other than "Percussion Set 3."
Use the correct procedure to turn on the
power of the connected external devices.
Turn the V-LINK function off, or select
Mode 1 for the V-LINK function.
Page
p. 22
p. 23
p. 23
p. 62
p. 123
p. 47
p. 66
- - -
p. 48
p. 228
p. 231
p. 215

Advertisement

Table of Contents
loading

Table of Contents